Bảo hành: 12 tháng
Nguồn gốc xuất xứ: Mỹ/ Trung Quốc
GIAO HÀNG TOÀN QUỐC(Giao hàng miễn phí đơn hàng có giá trị từ 30.000.000 VNĐ )
THANH TOÁN LINH HOẠTHỗ trợ trả góp qua thẻ VISA/ MASTER
TƯ VẤN KHÁCH HÀNG 0972.682.830(Miễn phí từ 8h30 - 21:00 mỗi ngày)
Two-Way 6.5" Coaxial, Low Profile, Ceiling Loudspeaker
The Control 47LP is a premium in-ceiling professional loudspeaker designed for applications that require extremely wide bandwidth along with very consistent coverage.
Featuring JBL’s exclusive conical Radiation Boundary Integrator® (RBI™), the RBI provides a large waveguide for the tweeter while low-frequency sound projects through specially-designed apertures in the RBI, allowing for a seamless integration of coverage between the two coaxiallymounted drivers. The result is extremely consistent sound character with very little variation throughout the listening space. The wide coverage allows for the use of fewer loudspeakers compared to speakers with less consistent coverage control, while at the same time providing better coverage of the area.
The shallow backcan on the Control 47LP enable the system to be installed into areas with shallow or restricted mounting depths.
The Control 47LP’s 165 mm (6.5 in) woofer features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former provides low distortion and high sensitivity. The coaxially mounted 25 mm (1 in) soft dome features
internal damping for smooth extended response and ferrofluid cooling for enhanced power handling and reduced power compression. The result is crisp, clear highs.
Ideal for small and large projects alike, the Control 47LP is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.
·Extremely consistent 120° broadband pattern control featuring JBL’s exclusive conical Radiation Boundary Integrator® (RBI™) technology.
· Provides very consistent coverage of listening area.
· Wide coverage requires fewer speakers, reducing the cost of the installed system without sacrificing performance.
·Coaxial design featuring:
· 165 mm (6.5 in) woofer with butyl rubber surround.
· 25 mm (1 in) soft-dome tweeter on 250 mm (10 in) diameter wave guide.
·Slim design (142 mm / 5.6 in) for use in spaces with restricted / shallow mounting depths
·8 ohm and 70V/100V operation.
·Integrated backcan for easy “blind-mount” install. Packaged with grille and tile rails for easy installation.
Frequency Range (-10 dB)1:
68 Hz - 20 kHz
Frequency Response (± 3 dB)1:
100 Hz - 17 kHz
150 Watts Continuous Program Power
75 Watts Continuous Pink Noise
Nominal Coverage Angle3:
120° conical coverage
Directivity Factor (Q)3:
Directivity Index (DI)3:
Rated Maximum SPL:
110 dB @ 1 m (3.3 ft) average, 116 dB peak
8 ohms (in bypass mode)
60 W, 30 W, 15 W, (& 7.5 W @ 70 V)
Transformer Insertion Loss:
0.76 dB @ 60 W, 0.70 dB @ 30 W,
0.61 dB @ 15 W, 0.58 dB @ 7.5 W
165 mm (6.5 in) with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former.
25 mm (1 in) soft dome w/ dampening, ferrofluid-cooled.
Two removeable locking 2-pin connectors with screwdown terminals. Max wire 12 AWG (2.5 mm).
Two (top and side)
Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 & NFPA 70. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
305 mm Diameter x 142 mm Depth from back of baffle (12 in x 5.6 in)
282 mm Diameter (11.1 in)
Ceiling Thickness Range:
Accommodates tiles/drywall up to 70 mm (2.75 in) thick
4.3 kg (9.5 lb)
C-ring support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles), knockout strain relief, cutout template, paint shield, 2 removable locking multipin connectors.
MTC-47NC New Construction Bracket
MTC-47MR Mud Ring Construction Bracket