Loa âm trần JBL Control 47C/T – Prosound Digital Video
Giỏ hàng

JBL Control 47C/T

Thương hiệu: JBL
Loại: Loa âm trần
Mã SP: Control 47C/T
Liên hệ

Bảo hành: 12 tháng

Nguồn gốc xuất xứ: Mỹ/ Trung Quốc

Hotline hỗ trợ 24/7: 0972 682 830
Số lượng
  • free ship
    (Giao hàng miễn phí đơn hàng có giá trị từ 30.000.000 VNĐ )
  • Return
    Hỗ trợ trả góp qua thẻ VISA/ MASTER
  • Hotline
    TƯ VẤN KHÁCH HÀNG 0972.682.830
    (Miễn phí từ 8h30 - 21:00 mỗi ngày)

Two-Way 6.5" Coaxial Ceiling Loudspeaker with Extended Bass

            The Control 47C/T is a premium inceiling professional loudspeaker designed for applications that require extremely wide bandwidth along with very consistent coverage.

            Featuring JBL’s exclusive conical Radiation Boundary Integrator® (RBI™), the RBI provides a large waveguide for the tweeter while low-frequency sound projects through specially-designed apertures in the RBI, allowing for a seamless integration of coverage between the two coaxiallymounted drivers. The result is extremely consistent sound character with very little variation throughout the listening space. The wide coverage allows for the use of fewer loudspeakers compared to speakers with less consistent coverage control, while at the same time providing better coverage of the area.

            The large backcan on the Control 47C/T, along with the LF driver design, provides extended bass response for a warm fullbodied tone. The system’s 165 mm (6.5 in) woofer features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former provides low distortion and high sensitivity. The coaxially mounted 25 mm (1 in) soft dome features internal damping for smooth extended response and ferrofluid cooling for enhanced power handling and reduced power compression. The result is crisp, clear highs.

            Ideal for small and large projects alike, the Control 47C/T is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.



·Extremely consistent 120° broadband pattern control featuring JBL’s exclusive conical Radiation Boundary Integrator® (RBI™) technology.

·            Provides very consistent coverage of listening area.

·            Wide coverage requires fewer speakers, reducing the cost of the installed system without sacrificing performance.

·Coaxial design featuring:

·            165 mm (6.5 in) woofer with butyl rubber surround.

·            25 mm (1 in) soft-dome tweeter on 250 mm (10 in) diameter wave guide.

·Bass extension to 55 Hz.

·8 ohm and 70V/100V operation.

·Integrated backcan for easy “blind-mount” install. Packaged with grille and tile rails for easy installation.




Frequency Range (-10 dB)1:

55 Hz - 20 kHz

Frequency Response (± 3 dB)1:

75 Hz - 17 kHz

Power Capacity2:

150 Watts Continuous Program Power

75 Watts Continuous Pink Noise

Nominal Sensitivity:

91 dB

Nominal Coverage Angle3:

120° conical coverage

Directivity Factor (Q)3:


Directivity Index (DI)3:

7.9 dB

Rated Maximum SPL:

110 dB @ 1 m (3.3 ft) average, 116 dB peak

Rated Impedance:

8 ohms (in bypass mode)

Transformer Taps:

60 W, 30 W, 15 W, (& 7.5 W @ 70 V)

Transformer Insertion Loss:

0.76 dB @ 60 W, 0.70 dB @ 30 W,

0.61 dB @ 15 W, 0.58 dB @ 7.5 W



LF Driver:

165 mm (6.5 in) with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former.

HF Driver:

25 mm (1 in) soft dome w/ dampening, ferrofluid-cooled.



Input Connectors:

Two removeable locking 2-pin connectors with screwdown terminals. Max wire 12 AWG (2.5 mm).


Two (top and side)

Safety Agency:

Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 & NFPA 70. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.


305 mm Diameter x 259 mm Depth from back of baffle (12 in x 10.2 in)

Cutout Size:

282 mm Diameter (11.1 in)

Ceiling Thickness Range:

Accommodates tiles/drywall up to 70 mm (2.75 in) thick

Suspension Points:

Three, on top surface


5 kg (11 lb)

Included Accessories:

C-ring support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles), knockout strain relief, cutout template, paint shield, 2 removable locking multipin connectors.

Optional Accessories:

MTC-47NC New Construction Bracket

MTC-47MR Mud Ring Construction Bracket

Sản phẩm liên quan

Sản phẩm đã xem

0₫ 0₫

GỌI MUA HÀNG ( 08:30-21:30 )

0972.682.830 Tất cả các ngày trong tuần

GÓP Ý, KHIẾU NẠI ( 08:30-20:30 )

0966.639.691 Các ngày trong tuần ( trừ ngày lễ )