Bảo hành: 12 tháng
Nguồn gốc xuất xứ: Mỹ/ Trung Quốc
GIAO HÀNG TOÀN QUỐC(Giao hàng miễn phí đơn hàng có giá trị từ 30.000.000 VNĐ )
THANH TOÁN LINH HOẠTHỗ trợ trả góp qua thẻ VISA/ MASTER
TƯ VẤN KHÁCH HÀNG 0972.682.830(Miễn phí từ 8h30 - 21:00 mỗi ngày)
Two-Way 8 inch (200mm) Coaxial Mushroom Landscape Speaker
Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.
8” highly weather-resistant driver
1” soft-dome highly weather-resistant tweeter
120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer
Tough polyethylene highly weather resistant enclosure
Fully isolated center chamber for wiring protection·High fidelity sound character with broad frequency range of 47Hz - 16kHz
Frequency Response (-10dB)
47 Hz – 16 kHz
240 W Continuous Program (2 hrs)
120W (480W peak), Continuous Pink Noise (2 hrs)
100W (400W peak) Continuous Pink Noise (100 hrs)
70V: 60W, 30W, 15W & 7.5W
100V: 60W, 30W, 15W
Frequency Response (±3 dB)
60Hz - 15 kHz
Maximum Input Voltage
87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
Nominal Coverage Angle
360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
Directivity Index (DI)
Rated Maximum SPL
108 dB @ 1m
8Ω (at 8Ω setting)
6.6Ω at 9.5kHz
<0.5 dB at any tap setting
2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective High-Pass
45 Hz for 8Ω operation, 24 dB/oct
80 Hz for 60W tap, 24 dB/oct
50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
Low Frequency Driver
200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and
25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
Powder coated stainless steel.
IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity,
salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer
via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base
and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm
and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
Hunter Green, RAL6018
Dimensions (H x W x D)
524 x 355 x 355 mm (20.7 x 14 x 14 in.)
7.8 kg (17 lb)
10.5 kg (23 lb)
(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
Installer-Supplied Required Tools
22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.