Bảo hành: 12 tháng
Nguồn gốc xuất xứ: Mỹ/ Trung Quốc
GIAO HÀNG TOÀN QUỐC(Giao hàng miễn phí đơn hàng có giá trị từ 30.000.000 VNĐ )
THANH TOÁN LINH HOẠTHỗ trợ trả góp qua thẻ VISA/ MASTER
TƯ VẤN KHÁCH HÀNG 0972.682.830(Miễn phí từ 8h30 - 21:00 mỗi ngày)
Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker
The Control® 25-1L is a two-way 5-¼” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
·5-¼” woofer with woven fiberglass cone
·3/4” PEI diaphragm tweeter with fluid cooling
·Contemporary, high-design appearance
·Built-in InvisiBall® mounting hardware, plus available U-bracket
·Weather resistant enclosure and transducers
·Wide 100° x 100° coverage
·100 Watt power handling (200 Watt program)
·High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.
Frequency Range (-10 dB)
60 Hz to 20 kHz
Frequency Response (+/-3 dB)
85Hz - 17 kHz
200 W Continuous Program (2 hrs)
Maximum Input Voltage
25.3 V RMS (2 hrs), 50.6 V peak
110 dB ave. Continuous Pink Noise (116 dB peak)
90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
100° x 100°
Directivity Factor (Q)
6.04 (averaged 1kHz – 16kHz)
Directivity Index (DI)
7.6dB (averaged 1kHz – 16kHz)
2nd order low-pass, 3rd order high-pass
Recommended Protective High-Pass6
60 Hz high-pass (24 dB/oct)
Low Frequency Driver
135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection,
high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension
spider, and FEA optimized motor structure.
High Frequency Driver
19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum
UV fade resistance.
Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with
WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC
25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either
MTC PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes
MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™
grille for breaking up driving rain and for especially difficult environments.
Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to
9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional
MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather
Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D)7
243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount
3.0 kg (6.7 lbs)
7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key
MTC-25UB-1 – Yolk-type U-bracket (&-WH)