Jack canon Neutrik NC3MXX-B (Đầu jack Gold)
Bảo hành: 0 tháng
Nguồn gốc xuất xứ: Liechtenstein
-
GIAO HÀNG TOÀN QUỐC
(Giao hàng miễn phí đơn hàng có giá trị từ 30.000.000 VNĐ ) -
THANH TOÁN LINH HOẠT
Hỗ trợ trả góp qua thẻ VISA/ MASTER -
TƯ VẤN KHÁCH HÀNG 0972.682.830
(Miễn phí từ 8h30 - 21:00 mỗi ngày)
3 pole male cable connector with black metal housing and gold contacts
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
Features & Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, longlasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product
Product | |
Title | NC3MXX-B |
Connection Type | XLR |
Gender | male |
Electrical | |
Capacitance between contacts | ≤ 4 pF |
Contact resistance | ≤ 3 mΩ |
Dielectric strength | 1,5 kVdc |
Insulation resistance | > 10 GΩ (initial) |
Rated current per contact | 16 A |
Rated voltage | < 50 V |
Mechanical | |
Cable O.D. | 3.5 - 8.0 mm |
Insertion force | ≤ 20 N |
Withdrawal force | ≤ 20 N |
Lifetime | > 1000 mating cycles |
Wiresize | max. 2.5 mm² |
Wiresize | max. 14 AWG |
Wiring | Solder contacts |
Locking device | Latch lock |
Material | |
Boot | Polyurethan |
Contact plating | 0.2 µm Au hard alloy over 2 µm Ni |
Contacts | Brass (CuZn39Pb3) |
Insert | Polyamide (PA 6.6 30 % GR) |
Locking element | Zinc diecast (ZnAl4Cu1) |
Shell | Zinc diecast (ZnAl4Cu1) |
Shell plating | Black chromium |
Strain relief | Polyacetal (POM) |
Environmental | |
Flammability | UL 94 HB |
Standard compliance | IEC 61076-2-103 |
Protection class | IP 40 |
Solderability | Complies with IEC 68-2-20 |
Temperature range | -30 °C to +80 °C |